Prime Collaboration Assurance upgrade v9 to v10

[Clifford McGlamry]

Currently have an upgrade running on Prime Assurance, and am seeing some things in the traceback on the console that concern me.

This is Prime Collaboration Assurance, the upgrade package, downloaded from CCO and matching the MD5 hash.  It's been running about an hour, and spit out some stuff about Installing and migrating to Cisco Prime LMS 4.2.  And it's not one line, it's like 4 screens of stuff about it.

What the heck???  This isn't LMS.  Don't see anything about this in the docs, nor do I see any other posts about this.

Maybe this is normal, but it's extremely disconcerting.

We're installing from PCAssurance-appbundle-10.0.0.40038.x86_64.tar.gz

Any input appreciated....

Cliff

[Aman Soi]

Hi Cliff,

you can refer the DOC for upgrades

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-0/upg_mig/guide/Cisco_Prime_Collaboration_Upgrade_Migration_10.html

you can also verify the checksum by using utility like FastSum.

regds,

aman

[Clifford McGlamry]

Upgrades doc did not address this issue.  Checksum wasn't the issue either.

The upgrade completed successfully, but the Product Manager has indicated that there may be something they need to look at regarding the trace back.  It was confusing, but didn't cause an issue with the upgrade.

[Aman Soi]

Hi Cliff,

Gr8 .. u are through with upgradation.

What exactly u mean traceback in console ? Any snapshot which u have if u can share.

regds,

aman