cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
341
Views
0
Helpful
2
Replies

Reprogramming from SCCP to SIP 7942-7962

khenning
Beginner
Beginner

We will be looking at moving to CUCM 14 and we currently have around 800 7942 + 7962 phones in our system besides all the other ones being deprecated, All our phones are set up as SCCP and we would like to move the existing to SIP.  Any easy way to do this besides building them all from scratch??

 

Thanks

Kevin

1 Accepted Solution

Accepted Solutions

jason-mcgee
Participant
Participant

khenning,

 

It's an older article, but it covers probably the easiest way to do it. You might consider doing a batch before you upgrade and make sure they work correctly. You definitely don't want to get stuck with 800 non working phones after the upgrade.

 

https://www.cisco.com/c/en/us/support/docs/collaboration-endpoints/unified-ip-phone-7900-series/5455-handset-to-sip.html

 

Jason

View solution in original post

2 Replies 2

jason-mcgee
Participant
Participant

khenning,

 

It's an older article, but it covers probably the easiest way to do it. You might consider doing a batch before you upgrade and make sure they work correctly. You definitely don't want to get stuck with 800 non working phones after the upgrade.

 

https://www.cisco.com/c/en/us/support/docs/collaboration-endpoints/unified-ip-phone-7900-series/5455-handset-to-sip.html

 

Jason

Found in the Bulk Admin that there is a step to do this. will play with it and see what happens.

 

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers