Requirement when Cisco CUCM install on non-Cisco server

[osw200051]

Hi All,

I am planning a CUCM and CUC install on non-cisco server. But what I need to check before go to the installation? assume the 3-party server have enough CPUs, RAM and storage for us. Any other spec I need to check also??

Thanks for your idea.

[Jitender Bhandari]

Hi,

Check below for details.

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/collaboration-virtualization-hardware.html#processor

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-unified-communications-manager.html

(Rate if it helps)

JB

[Deepak Rawat]

As long as the CPU is supported and is mentioned in VMWare Hardware Compatibility List they you can definitely use that server. Refer below:
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/collaboration-virtualization-hardware.html#servercompatibility

(Remember to Rate Helpful Posts)
Regards
Deepak

[Jaime Valencia]

Make sure your storage meets the IOPS requirements for the apps you're going to be installing.