I have 2 uc320w in seperate locations. Is there a way to be able to communicate between one another. Can a person from site a call a person from site b both using spa phones on a uc320w simply by dialing an extension? Would appreciate any help.
Thanks for the reply. The one thing i'm confused about is, do I have to have different first digit extensions on each site? Site A with extension 1xx and Site B with extension 2xx or can they both be 1xx? Also as far as SIP settings go I know I put the ip address of the opposite uc320w and each uc320w but what would go under account id? Also would I need an authentication id and password for each uc320w or would I leave those fields clear? I would appreciate any help. Thanks
I have the same question to set up UC320W with two sites which are connected with site to site VPN. I have site A with UC320W connected to PSTN, and site B with another UC320W connected to PSTN. I want to make external calls via PSTN for each site, but make internal calls (dialing any extension numbers) between site A and site B. If it is not possible, can I use one UC560 and one UC320W to make it possible? If it is still not doable, can I add any other Cisco devices to make it possible?