01-15-2019 01:41 PM
Hi,
I was wondering if anybody has a way of gathering all the gateways configured along with which ports were configured.
For example a VG202 with port 0/1 configured with x1234 but port 0/2 is not configured.
Thanks in advance,
Ted
01-26-2019 03:37 PM - edited 01-26-2019 03:38 PM
Assuming a modern build of CUCM and that the equipment is built as SCCP or MGCP since you didn’t provide any qualifiers.Run a BAT export:https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/bat/11_5_1/CUCM_BK_B4FA1139_00_bulk-administration-guide_1151/CUCM_BK_B4FA1139_00_bulk-administration-guide_1151_chapter_0110100.htmlorhttps://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/bat/11_5_1/CUCM_BK_B4FA1139_00_bulk-administration-guide_1151/CUCM_BK_B4FA1139_00_bulk-administration-guide_1151_chapter_0111110.html#CUCM_RF_E7E5069E_00__section_99DEE013960D4B01962CA08D0F9205...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community