About Error Code F1000020

[kashima yoshihito]

Hi

UCS System : UCS Mini / Firmware 3.1(2b)i

Now I see this Error code F1000020

the discription is as follows

 <faultInst ack="no" cause="fsm-failed" changeSet="" childAction="deleteNonPresent" code="F1000020" created="2011-02-25T04:16:22.037" descr="[FSM:FAILED]: Power-cycle server sys/chassis-1/blade-5(FSM:sam:dme:ComputePhysicalPowercycle). Remote-Invocation-Error: shutdown in progress" dn="sys/chassis-1/blade-5/fault-F1000020" highestSeverity="critical" id="204009" lastTransition="2011-02-25T04:16:22.037" lc="" occur="1" origSeverity="critical" prevSeverity="critical" rule="fsm-sam-dme-compute-physical-powercycle-fsm-fail" severity="critical" tags="fsmstagefail" type="fsm"/>

According to the document .

if i see this message , i can do nothing about this matter .

I fixed the issue unless i restarted blade , but several hours have passed , i could see the messages again .

if you know what to do , Please let me know so that i could solve the matter .

Regards

[AFROJ AHMAD]

Hi,

Unless an FSM fault appears on the Faults tab, you do not need to take any action to resolve the fault. FSM stages fail and retry for many reasons. These faults do not always indicate an issue with a component or the FSM.

Fault Details

Severity: critical

Cause: fsm-failed

CallHome: none

mibFaultCode: 1000020

mibFaultName: fsmFailComputePhysicalPowercycle

moClass: compute:Physical

Type: fsm

Thanks-

Afroz