one UCS with 7 blades,there is a vic 1340 in each blade.
two MDS c9148s,named MDS A01,MDS A02
one EMC VNX5200 storage
one MDS c9148s,named MDS B01
the distance between two sites are about 6 km,there is a native FC connecttion between two MDS,MDS A01 and MDS B01(merged ,MDS A01 is principal switch)
if it possible to zone vfc in MDS A01 in A site with wwpn of storage in B site?
if it possible to configure UCS in A site to use the storage in B site?the customer assumed the storage in A site crashed
the B2B credit is 64 in MDS,can it be 253 for free?
thanks for any help
See http://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/int/nxos/cli_interfaces/buffers.html#47564 in regards to 9148 B2B credit config/maximums.
See http://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/hw/9100series/installation/5-1/9100_HIG/techspec.html and http://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9000-series-multilayer-switches/product_data_sheet09186a00801bc698.html for distance limitations with various SFPs.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: