Trying to do Auto Deploy for VMware and need the C-Series (in this case a UCS C480 M5) to boot from PXE. However, I don't see a way to specify a VLAN ID for the PXE boot. Generally, on other companies servers, I'll enter the BIOS of the network car...
I am trying to login to CIMC on an M3 that I have not had turned on in over 1 year. I can get to the login screen and my password is accepted, but the login hangs with the green and white bar rolling forever. I can access ssh interface, but cannot ac...
PowerShell Connect-IMC fails with "The requested security protocol is not supported" when run under PowerShell Core 6.0.2 (I confirmed this code works under Pwershell 5.1.14409.1012):PS > Import-Module Cisco.ImcPS > $handle = Connect-Imc -Name server...
Hi all, We have Cisco UCS 6248UP UCS Manager V.2.2(3f) and we need to upgrade if possible to last Suggested version 3.2(3d) without any interruption to our services. Is that possible and what are the steps that we must follow? Thank you...
Hi All, I'm having to FEXes, each is connected to FI Fex1 to FI-A Fex2 to FI-B I succeeded with connected C-Series Server But now, when I'm connecting a chassis to it, the FI is not dicovering it I connected 4 ports from left IOM to FEX1, and 4 p...
Hi All, We have one UCS VIC 1225 10GBps card installed on slot 2 of the CISCO UCS C240 M4S server. OS is windows 2012 R2. We have installed proper firmware and driver but still we are unable to ping the IP configured on the VIC adapter. We have t...
My company isn't leveraging Cisco UCS Central yet so I am creating a fault viewer via API calls to all of UCS FI's. Here is the issue I'm having, I'm trying to retrieve all of the major faults for a given pod with the code below; curl -d "<aaaLogin i...
I have a c240 m4 and c220 m5 that are set up with cimc. I want to move those over to be managed by our FIs. What is the best process of doing this? I have them connected to the FIs already but they are not showing up under servers. I assume I have to...
Hello, I am recently trying to do an automatic windows install on a B220 M5 server. The server is equipped with 4 x HDDs (Disk IDs 3 -6) and 2 x SSDs (Disk IDs 1 - 2). The operating system should be installed on the two SSDs and the remaining HDDs ...
Hi, I am going through the build of the CIsco UCS environment, and after configuration of the FIs in HA mode, while doing testing, if I remove FI -A mgmt cable then it starts the failover to FI-B, and taking long time to do the failover, more than ex...
When i tried to associate profile to B200 M5 brand new server, getting below error before apply th e profile. --------------------------------- Will cause a Configuration Failure of:Service Profile fswtemp1 (org-root/ls-fswtemp1) Failure Reason: T...
Hello, I have had to reboot the subordinate FI yesterday and the reboot affected SQL Servers. All other hosts/servers in the same UCS chassis were all good. I expected them to still be able to communicate over primary FI. Anyone knows what/why/h...
I was using a script to run a configuration backup against UCS. I had an issue with some snytax in the script and it generated an error in UCS when I ran it. I've fixed the issue with the script and it runs successfully now, but the critical error ...
Dears, I m very new to the UCS chassis and I want to know things in basic explanation. I have a 2 no's of FI up and running connected to the core switch 6509 in VSS, I have a cisco ISE server as an VM in the chassis which need to connect to the ...
My current network setup I have Cisco 3850 as my core switch L3 functionality, and I have a second 3850 stack that I connect my iscsi SAN's to. The SAN stack operates on a VLAN with the core stack as its default gateway but connectivity between the ...
