Unified Computing System Discussions

Hi Friends,  In my environment, found HTTPS options is disable in communication mgmt tab. I would like to enable HTTPS to access the Fabric interconnect. how ever my concern is, If i enable the option, will it requries any service / FI reboot or will...

Hi everybody!!! Do you know if server Cisco UCS B200M4 supports Oracle Retail ? Thanks. Angel

Hello all,I need a guidance to do a NIC partitioning part at Blade level, as per below configuration. Enclosure : 1xUCS 5108Blade : UCS B200 M4 + Cisco UCS VIC 1340 modular LOM  ( No port extender)Chassis to FI  Connectivity - FEX-A & FEX-B 2+2= 4 co...

It impossible to find drivers on cisco:s support page. Where is this driver for download.Cisco VIC FCoE Storport MiniportOS: Windows Server 2008 R2 Enterprise x64 

Hello, we're having some issues in setting up Microsoft NLB in our environment. Here are the details: 1. We have created a dedicated VLAN for the two NLB cluster members.2. On the distribution switch (SVI of this VLAN), we have set static arp and mac...

 I faced a placement issue on brief:Hardware: UCSB-B420-M4, UCS-SP-FI48, Cisco UCS VIC 1380 mezzanine, Cisco UCS VIC 1340 modular LOM, Cisco UCS Port Expander Card (mezz) with UCSM 3.2.1d (infrastructure and servers) adtapters showing as adpter 1 and...

Hi Guys, We are setting up a new UCS Mini, with 2 B200 M4. We acknowledge already the chassis, and both servers stuck on 44% at FSM with vmedia failed. We already did rebooting the FIs.

Hello Guys,  I've recently had to upgrade a UCS C220 M3 to 3.0.3. During the upgrade it upgraded the embedded LSI Raid. I'm able to build a raid with the new firmware and it is Online. Unfortunately the Virtual Drive is not recognised by VMWARE. I'v...

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to ask questions about UCS Architecture, Configuration and Troubleshooting to  Artem Tkachov and Dmitry Radchuk.  To participate in this event, please use t...

Hello, We encountered an error wherein, a certain application that we have installed in Cisco ESXI is now missing from the inventory list but it is still functioning and it can be seen on the data store. Here is the screenshot. As you can see the...

Dear Friends,We got brand new UCS mini box and I’m trying to setup and test the Network failover.2 Core SW - Cisco 4500x – 2 uplink per IOM to Core Switch1 port channel per IOM- LACP (Port-channel 11 for IOM-A eth1, eth2. Port-channel 12 for IOM-B et...