Unified Computing System Discussions

HI, We would like to change the name of vlan in UCS. We didn´t find how we do. Our configure is: scope eth-uplinkcreate vlan oldname 3275 scope org Virtualizedscope vnic-templ ethx.dvsVMs-Acreate eth-if oldname scope org Virtualizedscope vnic-templ...

I have completed the Auto install process a few times, but most have been with minimal production traffic in place.  I have one scheduled for this weekend and would like clarification on whether it is best practice to shutdown the network and storage...

Could you please direct me towards documentation on the Cisco website that would describing the process and steps to be take when updating from ESXi 4.1 to 6.0 for the UCS C210 M2 hardware. Is it simply a case of applying the following file update to...

Hopefully, this is a simple issue. I'm working with several C220M3 servers where we have installed a VIC 1225 in each server. The VIC is configured and working. We have a requirement for a 1gb NIC and would like to use one of the two built in NICs (L...

Hi, I just purchased some new hard disks (total: 5 x 500GB HDs) and plugged to C220 M3S server, which is running the BIOS version as C220M3.2.0.1b.0 (Build Date: 05/26/2014). I cannot select the option as RAID 10 on the below photo. Any idea?

I have power issue logs shown in my UC220 server and it gives   in server overall status " Server Fault "when i check the logs   i found the following :PVTT_P2: Processor 2 voltage is lower non-recoverablePVTT_DDR_GH: Memory channel (GH) voltage is l...

If I order a VIC 1225 on a C-Series server are qty 2 of SFP-10G-SR SFPs included?

HI all, I am facing an issue after recommission my chassis in to FI that access accessibility  problem and i am not able to see any servers  

HI all, I am facing an issue after recommission my chassis in to FI that access accessibility  problem and i am not able to see any servers  

I want to upgrade the Cisco UCS 5108 (PID and SKU N20-C6508) with the following blades B200 M1 (PID:N20-B6620-1) to the latest and greatest UCS Manager to 3.1(1h).  I really need the HTML5 capability because the latest Java we installed considers the...

If the UCS Serie C server has the power cords unplugged, are we still able to access it thru the CIMC tool using as well POE (Power over Ethernet)?

I need to find the the list of IQN resources assigned to each service profile. I can see details of IQN pool, used and available IQN resources, the service profile which been used particular IQN pool from UCS central. but cannot find the list of IQNs...