Unified Computing System Discussions

Hi, We have a collapsed core using two N7K as core and with Access switches 3650. We have vpc running on core and port-channels on the access switches side. When we ping from one of the core or access its fine and 100% success without any packet los...

It doesn't appear there are any cisco teaming drivers for windows 2012 r2 as there is for windows 2008 r2. I have: 2.2 (5d) B200 m4 VIC 1340 The cisco VIC Ethernet interfaces are teamed in windows 2012 r2 using a Microsoft network adapter multiplex...

Upgrading firmware in 420 blade. We have a couple of hosts that hang at 7% with the following error: Remote Invocation Error Code: ERR-insufficient-equipped Running version: B420M3.2.1.1a.0.121720121615 Startup version: B420M3.2.2.4a.0.041720151358...

Hello All, I am planning to upgrade my environment from old existing hardware to new hardware. Existing Equipments Two FI 6248 UP One Chassis UCSB-5108-AC2 Two Chassis N20-C6508 Six UCS-IOM-2208XP 21 UCSB-B200-M3 blade servers. I want to replace abov...

Hi , I want to know how to change a part of UCS Host Firmware Package. when i tried it , I saw a error message. the message is as follows 「Blade Package and/or Rack package is set. Individual PackImage modification is not allowed for this Host Firmwa...

Hi team Can you please provide me Linux commands to check the Raid battery status on cisco ucs c series servers. Thank you

Good morning, all! I subscribe to the C-series Rack Server notices and received FN-64073 yesterday.  This refers to a drive condition of very low usage and a resultant physical failure.  Even though my servers aren't under support I still need to kno...

all of a sudden a UCS unit started giving multiple warnings , it contain three Solarwinds Vm machines one for data base and two solarwind windows machines , i started getting these mixed warning and im really not sure what to do next please help , he...

I am hoping experts on this forum can help me understand how the following actions led to a situation where no traffic was being forwarded on a pair of 6509's configured in a VSS topology.   I have a UCS domain, 6296UP interconnects, cross connected ...

Can someone guide or provide any documentation on how to I clear old faults on UCS B series. I have worked hard to ensure the system in a good and healthy state. All these faults were generated when the system was initially installed and racked at cu...

Ok, I recently upgrade my two production UCS system to 2.1.2a and now I'm gettting this F1237 error, (voltage threshold cross) on two of my servers blades.  There doesn't seem to be much info on this error ... anyone have some insight?Thanks,Cy.     ...

As you can see under the new HTML5 interface, when selecting LAN > VLANs, the resize toggle does not actually resize the VLAN pane but instead leaves a white empty space. It doesn't prevent work from being done, but it's frustrating when you have lot...