Hello,
We are wanting to expand our environment and have purchased a new pair of 96 Port Fiber Interconnects. My understanding is that we should be able to replace the subordinate member of our current cluster with the 96 port model and be able to s...
Hi,
I would like to know in which firmware version release has board controller version 10 compatible for B200M4 blades and how to find out the board controller version for respective firmwares, tried to check in release notes, no go..
Currently, in...
I'm needing the fnic driver version 1.6.0.17a for our B200 M3 blades that are running ESXi 6.0. They current have version 1.5.0.45-3vmw installed on them. The links that have found for the newer version are all for ESXi 5.5. VMware Update Manager ...
Hello everyone
We have been fighting some odd VM networking issues with our 2012R2 HV cluster. To troubleshoot, I actually isolated one host and created 2 VM's, I then created a private vswitch and connected my 2 test VM's.
Here are the results I'm ...
Hello Forum.
Is it possble to using the usccfg tool for rebooting the CIMC (OoB) over the OS?
I'm using RHEL 5.8
in the XML file i found nothing.
<!-- cimc-header> <guid value="479142bb6aa34157aab67aa4c09ef84d"/> ...
I've been banging my head against this wall for long enough, so I am hoping someone can shed some light on where things have gone so wrong.
I recently deployed a UCS environment consisting of the following:
5108 w/ 5xB200 M4 blades2 x 6248 (2.2 (5a)...
Hello,
I've created a service profile with 2 HBA's and 8 vNICs. I have set the placement order to "Let system choose placement", but it always gives the HBA 5 and 10 and the vNICs 1,2,3,4,6,7,8,9.
In addition, the vNICs are not discovered by the OS...
Hello,
We have recently purchased additional B460 servers for our environment and are running into a bothersome issue. These newly shipped servers are arriving with a higher Board Firmware version than what we currently have in our environment. Altho...
We have recently had a Raid Controller failure on a C250 M1 server with Oracle Solaris (yes, I get it, it is old :)).
The replacement raid controller has a much newer firmware, this seems to cause the Solaris to panic on boot.
Is there a procedure to...
Hello, Experts,My customer want to know the power consumption and lbs of the UCS Blade and Modular series.So I could find the information about it with the tool "UCS Power Calculator".But they also want to know the heating value of the systems but I ...
I would like to have some assistance on enabling and configuring a Fiber Channel port on 2 of my UCS Fabric Interconnects. An external storage appliance will be connected to these ports.
