Unified Computing System Discussions

i have a pair of B460 M4 servers that my chassis is not able to detect. i have installed the latest firmware and infrastructure packages. the coupler also is installed correctly any idea what could be the problem ?

6248's running 2.2 3b with B200 m3&4's. When making changes to template/service profiles, such as adding vnic's. UCSM only prompts for a portion of the blades to be re-booted, via usr-ack. Other times it doesn't prompt for a re-boot at all on any of ...

We are in the middle of integrating VOIP into our enmvironment. The provider is asking for a VM to be built and a router to be connected directly to the VM. Can you integrate a GLC-T module into the 6248UP and connect the router directly to it. Confi...

I have seen a proposed solution that includes no GbE switching for Management ports for the N5K and 6248 FI'sI know I can connect the N5K's mgmt0 back to back and create a SVI on a VLAN for management, can I do the same with the 6248's?The current pr...

Hi I am testing a isr  router with a ucs blade installed but seem to run into some issues.  I have the router directly connected to my laptop and are follow the configuration instructions in the configuration guide.  I get the following symptoms in a...

Observed IP range show "None" in ESXi after reboot Fabric Interconnect. Everything is working fine except this issue.Please help

Hi,One of our Client has Cisco UCS C220 M3 Server with them and has LSI Megaraid software Raid in it.They want to install Windows 2008 OS (32-bit) on it & no R2.. Now we can't find any related drivers for this server for windows 2008. Kindly help reg...

I've just upgraded my UCS environment from 2.2(1d) to 2.2(3c) as Ive done many times before. This time I note the System Manager has upgraded the start-up version to 3C but hasnt restarted and is still running with 1D despite the Interconnects reboot...

Hi there,this is my first experience with cisco UCS and I have some problems about vlan tagging and trunking concepts implementation.VLAN trunking: actually works; I declared all vlans on the dynamic vnic and it looks ok, so, the profiles for vmware ...

Hi, I need to know the difference in configuration in UCS manager when using 1000v and when using vsphere standard switch The only thing that I think about is when we create vNIC template, we choose target as adapter if we'll use 1000v. and choose ad...

Dear All, Thanks to clarify if is it possible to connect ASA to FI directly from technical prospective ? and if there is any retractions? Thanks