Unified Computing System Discussions

Hello,Planning to do 1G iSCSI boot from SAN on UCS. Wanted to find out if this is doable.Best Regards,Rags

I'm looking for the PowerTool syntax to modify both of these values on individual service profiles. The documentation behind most of these cmdlests is almosts non-existent.I believe the boot policy may be able to be changed like this:Set-UcsServicePr...

We currently have all of our FIs integrated with MS AD and I would like to do the same for the C-Series servers. I have a question regarding the "Attribute" field under "Search Parameters". It has by default "CiscoAvPair" what is this suppose to be? ...

HiJust getting my first ever UCS blade ready for install, have about 60 more to go.  Coming from an HP blades shop I can set the blade to boot from a desired device one time on next boot.  This allows me to boot from a device of my choosing one time,...

Hi,on my ucs C24M3 after installing vmware esxi 5.5 at the first reboot when i select the virtual disk on bios (created on megaraid) to boot i can't see this option, only local drive. I disable on bios the embedded raid and i can't see the disk on bo...

Hi,During BIOS upgrade, one of our b200m2 servers has corrupted.We tried to recover bios, to revert to previous version, to re-flash, but without results (we tried this many times :) )We also tried cmos reset with cmos_reset jumper, also tried to put...

Hi,I can't ping from ESXi ISCSI vmkernel to Netapp iscsi interface.Can't see the provisioned storage on ESX. I want to rule out any issues on the UCS side.UCS 2.2.2 version with ESXi 5.5 local boot, loaded on the blades.Netapp direct attached to UCS ...

Hi,  Is it possible to export a service profile in one UCS domain and then merge it into a different UCS domain?   Thanks.

Since the update to 2.2(1d) we have network timeouts / outtages between vsphere vm's hosted on ucs b-series servers and the rest of the world outside vmware / ucs. first occured with sles10 guests, but windows 2008 and more are also involved. any ida...

Hi, I'm having issues connecting to a UCS cluster via powershell. To test basic access using Cisco UCS PowerTool 1.2.1.0 I enter "Connect-UCS 10.x.x.x" where I am prompted for my username password which authenticates against LDAP. This fails to conne...