Unified Computing System Discussions

Dear All,I have UCS-C220M3 server i insttalled  VMware-VMvisor-Installer-5.5.0-1331820.x86_64.iso . i want configure inside EXSi Cisco Wireless Lan Controller and Cisco Prime If you have idear about vWLC and prime could you please provide me configur...

Hello,In UCS if you need to change a password for admin account, it doesn't prompt for old password. Just provide new password, confirm the same all done!!I feel this a major security threat if some one logs in and change the Admin password? Thoughts...

Good afternoon I’m currently trying to setup a UCS c240 m3s server and am experiencing the following issue.The disk size is (4002432) the problem I’m having is the disk shows (Background Initialization) when I try to remove the disk I receive the fol...

Hello,We are configuring a UCS C22 for a customer. The first chassis we received, I followed the included directions and found that none of the external USB ports would recognize any keyboard we attempted to use. Further troubleshooting showed that t...

Hi,I want to change the UCS "QoS system Class" MTU for the "Best Effort" class' MTU from 9000 bytes to 9126 as per:http://www.cknetworx.net/?tag=ucs-jumbo-frames     and/orhttp://www.cisco.com/en/US/docs/unified_computing/ucs/UCS_CVDs/esxi51_ucsm2_Cl...

How to set a Power on password , Where you can provide a reference file? (C220/240/C22/C24/420/460.......)

Hello,I have a server Cisco UCS C22 M3 in which the fan speed not lower than 6000 RPM and generates a lot of noise. It is normal from turning on the computer and put at that speed?thanksgreetings

Hi everybody:I have a problem with a VSG version 4.2(1)VSG1(4.1)When I configure a simple rule in VNMC as permit all any any I can see in the VSG VSG1# show running-config rulerule Between31and32/PermitAll@root/Tenant1/VDC1/App1  action 10 permitrule...

Hello,In Equipment tab, Expansion module 3 and 4 is missing  from UCS Central.  I have 6296UP FI.                   Does anyway run into this issue?ThnaksHetal Soni

W2012 R2 with 2 veths (veth0 and veth1) (one connected to Fabric A, resp. B); team built with veth0 and veth 1; veth0 and veth1 in same Vlan, e.g. 10.LBFO (Load Balancing Failover): Switch independent, Hyper-V port2 such Hyper-V server in a UCS domai...

I see more and more partners and customers, that oppose to do boot from a network (be it FC, FCoE, iSCSI, PXE); they prefer installation on local disk, USB and / or SD. Any feedback from the field.One should also be aware, that W2012 (R2) we SMB V3 s...

Hi there,I have a question about UCS and FCoE – I don’t have a solution for my problem I configured my UCS with UCSM 2.1(3a) with a FCoE Uplink, default vsan, fcoe VLAN  99 – and the upstream nexus 5548up (nx-os 5.1.3) with npiv and fcoe  features – ...