Is there a Cisco UCS Platform Emulator User Guide?
Forum Posts
I am unable to review the release note 4.0(4I) and have tried to with different browsers and etc but same result.https://software.cisco.com/download/home/283612660/type/283655658/release/4.0(4l) Can anyone try and see if it might work for you guys? t...
Does anyone know and able to confirm if HX240C-M5L with 12TB drivers (HX-HD12T7KL4KN 12TB 12G SAS 7.2K RPM LFF HDD (4K)) cluster running HXDP 4.5 & ESXi supports 9 nodes? Refer to the following Cisco guide, HX 4.5 https://www.cisco.com/c/en/us/td/doc...
1) Can I run two HXDP clusters, for example 5-node and 4-node cluster, with the same pair of HX's FI?2) Does anyone experience this kind of deployment? Any concern and issues?3) Refer to the Cisco document (Guidelines for Adding Cisco HyperFlex to an...
The internal USB and the Flexflash SD are both USB 2.0 speed. im looking for some way to use the two SATA ports under the riser 1 holding PCI slots 1-3. Has anyone installed internal 2.5 drives?
I have a remote UCS on my hands. It experienced a power hit.The system has a chassis with blade servers and 6 rackmount servers with FEXes. The blade servers are OK, but the rack servers are inaccessible. A person local to the system told me that the...
I have a UCS MINI domain with v4.0(4b) firmware, ESXi v6.7u1 and using FC via Brocade switches for SAN access. Now I have purchased new MDS switches and IBM Storwiz FS7200 to replace the existing SAN infrastructure. It should be a fairly straight for...
Resolved! UCS FI 6454 Ethernet and FC modes?
With firmware v4.0.x, the UCSM release note shows "Ethernet or FC switching modes", link below.https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-4-0.html#concept_jtr_3sg_h2b From datasheet, it does show feat...
Hello,i am getting the following error during my infrastructure bundle update [FSM:FAILED]: Deploy OUI to Fabric-Interconnect(FSM:sam:dme:FcpoolOuisDeploy). Remote-Invocation-Error: SCI_GetAllOUIEntries API is not supported in running Switch Version ...
Resolved! ESXi on C220-M5SX with disk mirroring
Dear All, I need to install ESXi (v6.7U3 or above) with RAID 1 or 5 or 6. I have purchased the following components: UCSC-C220-M5SXUCSC-SAS-M5 [Cisco 12G Modular SAS HBA]5x UCS-SD400G123X-EP [SAS Solid State Disks]After checking in CIMC and loading t...
Hi, Anyone upgrade Hyperflex ESXi from 6.7 to 7.0 yet ?Is there any compatibility issue ?Which upgrade method is recommended ? Budi
The Login page was working before my friend had me update the server is there a fix for this or will I have to downgrade to a older version this box was using before I updated ??
Hello Community,we bought some new blades and also a new chassie. The chassie is up and running and now i want to add the new blades into it and assign my service profile. But there is one difference between the old ones and the new blade. The new ha...
Hi all, We have a question regarding the UCS, and cannot seem to find any documentation containing anything close to an answer. Our UCS is prompting us to reboot a blade server. We manually rebooted the server gracefully from the OS, however the UC...
Hello to all,I have a problem with a Cisco C240 M4. After upgrading the firmware with HUU iso from firmware 2.0 to latest 4.1.2f controller cannot recognize any hdd.SAS expander is showing on inventory. Server has 12x300Gb 10K drives that were workin...
