Hello, Looking at Cisco documentation, there is no mention of recommended VIC parameters for KVM hypervisor such TxQ, RxQ. CQ, Int. etc. I did see some information for Linux but that seems pretty generic to me. Wondering what parameters people keep ...
Forum Posts
Hi,We are having some issues, possibly my lack of understanding, on ACI, UCS, vSphere 6.7 u2 and VMM integration and I'm wondering if someone can point me in the right direction please. We have met all the pre-reqs in the guide, https://www.cisco.com...
I have a UCS with multiple blades in multiple chassis. Looking to separate 1 physical blade from the rest and run it as a separate bare metal server segmented from the rest. (specifically on the LAN side) All of my blades communicate through the up...
On our Cisco UCS 5108 with eight M5 blades, each power supply draws 4.5 amps for a total of 18 amps. If power supply A fail or became unplugged would the draw of PS B C and D increase by 33.3%? Each would then be running at about six amps? Or am Inot...
We have deployed a new UCS and ACI fabric and have noticed some odd behaviors in respect the presence of the MAC address that is assigned to FIA showing up on the port-channel designated for FIB. The connection is simple, VPC between 2 leafs to each...
Don't miss the Customer Connection roadmap session happening Thursday, April 22 at 7 am PT. This NDA session from the Cisco Data Center product management team will share the roadmap for the Cisco Hyperconverged Infrastructure solutions. They'll hig...
My team is tasked with re-purposing a UCS S3260 chassis with 2 S3260M3 server nodes (UCSC-C3X60-SVRNB). We used the CIMC GUI to factory-reset all components in chassis. We connected a KVM to server 1 to set CIMC IP and password. After setting the new...
Resolved! UCS Not Boot ESXi 6.0 to 6.5|Shell|
Hello Everyone, We recently tried to update a UCS ESXi 6.0 to 6.5. When the server was restarted it did not go back up and remains in shell mode. Try to change the priority of boot but the disk arrays are not displayed. Shell mode. Boot options. ...
Resolved! B200 M5 ordering information.
1.What are the question to be asked before creating BOM for UCS B200 M5 server?2.Is it necessary to select operating system while ordering the B200 M5 server? Or is it optional?What is part id for ESXi 7?
1)Is there any compatibility issue install between B200 M4 and M5 into UCS 5108 AC2 blade chassis ?2) EOL details of both UCS 5108 AC2 blade chassis and B200 M5 blade server .
I was perusing the API tree, trying to get NIC information, but hit a 500 internal server error at this endpoint https://{{imc_ip}}/redfish/v1/Chassis/1/NetworkAdapters/2 : {"error": {"code": "Base.1.4.GeneralError","message": "See ExtendedInfo for m...
Resolved! UCS B200 M5 memory selection
I have a requirement for B200 M5 server.Total CPU count:CPU Distribution of 6 servers(CPU Socket * Cores * Threads): (4*10*2*6)=480 CPUsCPU Distribution of 8 servers(CPU Socket * Cores * Threads):(4*8*2*8)=512 CPUsTotal Memory-5376 GBShall I assume a...
Having issues with new M5 blades. I've been able to mount and boot to an ISO on my M3's and M4's. Not sure if something changed. I KVM to the console, activate media and mount the ISO. However When I boot up and hit f6 for boot menu, I do not ge...
Hi, Can I add the following drive types to a c240 M4SX, firmware version 2.0(10b). There is an existing virtual drive so i am thinking about adding these and creating another instead of expanding it. UCS-SD800G12S3-EPUCS-SD16TB12S3-EP thanks
Hi everyone I got the message " Login failed or timeout " whenever I try to KVM console the C-240 M4 server through UCS Manager.I have another C-220 M3 that I can successfully KVM console it on the same terminal computer.I am wondering if anyone faci...
