Hi everyone, I'm encountering issues to access to an IMC on a Cisco UCS C240 M3 Rack Server. The card itself didn't get any updates in a while and is currently running version 1.5(4) firmware.My question is the following : Is there any means to conne...
Forum Posts
Is it possible to obtain MTBF for UCS-C240-M4S and UCS-C220-M4S?
Hello, I'm writing with the hope of help: our company got refurbished blade servers 2 x UCS-B200-M44 x UCS-B200-M3 in UCS 5108 Blade Chassis UCS-SP-MINI-AC2 V03.Is there any way to find out the CPU models used in these blade servers by serial no? We ...
Working on a project that will require custom elements
Does anyone have a good recommendation for UCS traffic monitoring tools? Something with dashboards, reports, ect. Thanks
Hi all, I need some advice on my the HW and licenses required for uplinking the UCS6454 at 100gb to the Nexus 7K series.I actually have two sites, so one site is using the 7710 series and the other is the 7004 series, can you advise me if i'm on the ...
I am moving two chassis and a pair of fabric interconnects from one data center to another. When I turn up the FI's and chassis on the new network I want to use just 2 ports from IOM A and 2 ports from IOM B instead of the 4 ports each that they had ...
Hi. We have just bought ourselves a Secure Network Server 3595, and I wanted to upgrade BIOS, KVM etc before putting into production. But when I try to boot the server via Virtual Media, I get this error: Invalid signature detected. Check Secure Boot...
Hi, I need some advice on how to successfully apply the latest firmware HUU to a Cisco UCS C220 server with Secure Boot enabled. I'm trying to upgrade from 2.0.x to 3.0.4d. When I boot from the physical dvd or mount iso using vKVM, I get an error...
Hi All, I see some obsolete entries from as far as 1 month back in the Recovery and Maintenance tab of the HX Connect and was wondering if there is a way to clear them?
Hi, what is the main difference between:And:We are having some perfomance issues after upgrading our 2-node cluster from 2012R2 to 2019 and I am looking at maybe drivers as the culprit. Thanks
Hello We have a new Cisco UCS C3260 Rack Server And we are facing issues while installing Redhat on the machine, that is unable to detect the disk(Raid1) while installing OS, whereas we can see other disks.Should I enable something in BIOS?
Hi Dear FriendsI have nexus 3064 Problem is Any NMS ( zabbix PRTG Cacti)Cannot show me sub-inteface for routed Port (no switchport interface)For example eth1/1.10 eth 1/1.20 Do not get Graph and traffic show zero in PRTG and Cacti And Zabbix
Hi, We have installed 2X new B200 M5 Blades on an existing UCS-Mini chassis. The rest of the existing 6X blades are B200 M4 blades, running ESXi. At a vCenter level all of the vNICs reported for the 6 X existing M4 blades are showing as 20000Mbps...
Hello,I have a problem with a Cisco C240-M3 server.The front panel LEDs all light up green, the LED (D21) on the motherboard lights up permanently orange. Tested DDR3 4GB ECC Ram is in slots A1 / B1 and E1 / F1.Problem, the server is not starting.I w...
