Cisco, Vmware or Netapp document about Netapp Flexpod?

[ADAman]

Hello,

I was told in a presentation a couple of months ago that there is a 300+ pages document describing in detail how to set up a Netapp Flexpod solution. I have been looking everywhere for this document. I have found many, e.g UCS Deployment Guide from Cisco, but not a huge detailed document. Can anyone provide me with a link to this document, please?

[mipetrin · Accepted solution]

Hi,

I'm not aware of any 300+ page document, however you could use the following as a starting point:

Design Zone for FlexPod

http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns743/ns1050/landing_flexpod.html

FlexPod Deployment Guide

http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/Virtualization/flexpod_deploy.html

VMware built on FlexPod Deployment Guide

http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/Virtualization/flexpod_vsphere.html

FlexPod for VMware Deployment Model

http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/Virtualization/flexpod_vmware.html

Hope this helps.

Thanks,

Michael

[ADAman]

Thanks. Mayve I was wrong. Basically, I need examples of all the commands I need to configure everything, and hopefully it is in the documents you posted. Anyway, I ordered the Trainsignal UCS course. Seems very good.

[mipetrin]

Depending on which document you look at, some of the details that it contains include:

• configuration steps
• sample completed configuration
• provides links to videos detailing other configuration steps

Thanks,

Michael