03-29-2017 09:21 PM - edited 03-01-2019 01:08 PM
Hello Foloks,
Greetings !!
When I am preparing Cable Matrix to configure a new UCS POD we are using IPMI and KVM IPs. what is the difference of KVM and IPMI IP ? Can anyone help me out to understand about the IPMI IP ? Why do we use IPMI IP? How I can access IPMI ?
Regards
Surajit
Solved! Go to Solution.
03-30-2017 01:09 AM
https://supportforums.cisco.com/document/29826/what-ipmi-profile-ucs
explains it; you have configured the server side, but you Need a IPMI client application to Access it:
eg. http://forums.cacti.net/viewtopic.php?t=11593 or
http://www.sentrysoftware.com/kb/KB1056.asp
03-29-2017 10:20 PM
Hi Surajit
see eg. https://supportforums.cisco.com/discussion/11381301/cimc-vs-ipmi-both-b-and-c-series-ucs
What is IPMI ( a short animation )
http://www.intel.com/design/servers/ipmi/ani/index.htm
More detailed information about IPMI
http://en.wikipedia.org/wiki/Ipmi
Walter.
03-30-2017 12:32 AM
Hello,
Thanks for your reply.
In my infra, we have configured IPMI IP (service profile IP). But how I can use that IP?
Like KVM IP I can use that IP from a browser and it'll show KVM console of the blade. Is that same way IPMI works?
Regards,
Surajit
03-30-2017 01:09 AM
https://supportforums.cisco.com/document/29826/what-ipmi-profile-ucs
explains it; you have configured the server side, but you Need a IPMI client application to Access it:
eg. http://forums.cacti.net/viewtopic.php?t=11593 or
http://www.sentrysoftware.com/kb/KB1056.asp
03-30-2017 02:04 AM
Thanks Walter !!
Now It is much clear to me ..Much helpful and appreciated.
Regards,
Surajit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide