UCS firmware version for blade b200 m2 with adapter M81KR

[#1]

Hi Everyone,
I have Blade server B200 M2 using the adapter: M81KR (PID: N20-AC0002). My question is:
- What is the maximum UCS firmware version that support this adapter ?
- I have checked in Release Note 3.1(3a). I don't see this firmware version support the M81KR adapter. So have any 3.x firmware version support it ?
Thank you very much,

[Kirk J]

Greetings.

In your configuration, your Infrastructure Firmware can be a max of 2.2x, and the blade firmware package can be a max of 2.13x.

The M81KR is listed in the deprecated hardware list for 3.1x at 

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-3-1.html#reference_D8E0F1697DB8476D8B3016D38ECB6E72

Thanks,

Kirk...

[drodriguez@prosysis.com]

I have Blade server B230 M2 using the adapter: M81KR (PID: N20-AC0002). My question is:
- What is the maximum UCS firmware version that support this adapter ?

[Wes Austin]

This should answer your question(s)

https://ucshcltool.cloudapps.cisco.com/public/

[Tyler P]

Hi, 

Same as above, 3.1x firmware saw the deprecation of the M81KR card. The newest supported firmware is 2.2(8i)

3.1(1e)

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-3-1.html#reference_D8E0F1697DB8476D8B3016D38ECB6E72

2.2(8i)

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-22.html