Unified Computing System Discussions

Hi, I have a couple of questions on vnics in UCS and ESXi. 1. I often see in ESXi multiple vmnics are bonded to provide redundancies. However, since UCS vnics are virtual, is it really necessary to create multiple vnics and bond them at ESXi? Does ...

Hello Team, I am planing to upgrade CISCO MDS 9148 software from 5.0(xx) to 6.2 (xx) which is running with Cisco UCSM version running 2.2(6x). Is there any compatibility matrix available to check the compatibility between MDS and UCSM. management sof...

I have installed ESXi on my blade, however I am unable to access the ESXi IP. I have been looking at different guides and walkthroughs, all of which seem to skip the step of setting up the ESXi IP, and move directly on to accessing vSphere.Architectu...

I support a Cisco UCS blade system. It currently has UCS 2.01(T) and B200 M2  blades, and VMware 4.1 I need to know if it is  possible to upgrade to VMware 5.5 U3 , and what code the UCS needs to be at. Also, is there a document for upgrading the ...

Hello, I am experiencing connectivity issues in my UCS environment. An ESXi host with vnic0 connected to I/O Module 1 (2104) and vnic1 to I/O Module 2 is having connectivity issues to rest of network. When I remove vnic1 from the host, IP connectivit...

Hi All, Hope you guys doing great. I am trying to register UCS Central with UCSM domain. I have already done all the pre-requisites, like configuring NTP server and correct shared secret password. But while registering, it got stuck in FSM state  ...

Deployed UCS Central 1.3(1b). Successfully registered one domain.The registration of the 2nd domain got stuck. (see screen fsm_status.png)************Repair State: DoneRegistration Status: RegisteringFSM Status: In ProgressCurrent FSM Name: Register ...

Hello, We have Cisco UCS B-series. UCS Manager and KVM Manager are working fine. But when I enter Out-of-Band IP to access server directly (Cisco UCS KVM Direct), it says "Connection timeout". How can I resolve this. Thanks.

Hi all,UCS Manager in UCSPE 2.2(3c) shows fault , "DIMM on server has an invalid FRU "I know how to fix the problem . needs to upgrade the version of the capability catalog  .what version of capability catalog i can upgrade with UCS Manager in UCSPE ...

Been a UCS customer for 5 years.  Here's my problem. We initially got deployed by CDW for VMware and the person didn't create a template as you know it, just a service profile with updating components.  Then we clone off of that SP.  When I add new V...

We have 3 nos. of 5108 Chassis with 24 nos. of B200 M4 blade servers connected to 2 nos. of 6248 UP FIs.  Uplink from both FIs are connected to 2 nos. of Cisco N9K switches in vPC mode. There will be large no. of VMs on blades and these VMs will have...

I have to shut down parts of my network due to an electrical outage this weekend. I have a Cisco UCS 6100 Server Fabric Interconnect. I am trying to backup the configuration. This is the command I am using create backup tftp://*.24.1.88 full-state en...