Unified Computing System Discussions

 We have 2 Nexus 5548 and the UCS 6100 is homed to both with a port channel. We need to replace a 5548. When we unplug the UCS connection from that 5548 we lose the UCS totally. Even though it is still connected to the other 5548. Anyone seen this be...

Hi, I'm trying to install a Windows 2008 R2 x64 with SP1 in a blade server B200 M3, the adapter model is MLOM-40G-01 and boot from SAN is required. When the installation begins, it cannot find any disk so it asks to install the driver. We're trying t...

Currently working with two Platform Emulators and a 90-day UCS Central VM in my lab... but I do not see a way to configure the unified port behaviors/port-channels/etc. on the FIs via Central.I also don't see any direct reference to it in the documen...

I bought new cisco ucs C220 M3 server and install esx from cisco custom isoBut when i run esx ten minutes later system down . And storage adapter missing . Like photohttp://prntscr.com/3k48wg http://prntscr.com/3k4fmt  

Customer's SCOM works fine before UCS MP 2.6.2 installed.After installed UCS MP 2.6.2, the MP depletes all 24 GB DRAM in 4-5 days.Does anyone have this issue?Best Regards.Vincent Hsu

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Unified Computing System™ (Cisco UCS®) Fibre Channel storage connectivity and best practices for your environment as wel...

Both UCSPE 2.1(3a) and 2.2(1b) are using a Verisign "RA certificate" as basis for their self signed certificateHowever this certificate has run out on May 13th 2014In a "real" UCSM You can create a Key Ring with certificate from Your corporate or 3. ...

Hi,We recently have bought a UCS C220 M3 Server, in order to install a virtual environment through ESXi. When trying to install EXSi 4.1; the hard disks are not recognized and listed.When connecting to the Web GUI (CIMC), in the inventory, the disks ...

I have a Two VIC Card on Blade B200 the driver version is 2.3 need HyperV-2012 Vfabricit gives me unsupported driver.

Hi UCS Community, hope I'm posting in the right place...I'm playing with Cisco UCS PowerTool cmdlets but having a hard time finding which one will get / list the VLANs configured for a particular vNIC.  These are easy to find in UCS Manager (see scre...