In case you were not able to attend, members of our UCS TME team hosted a deep dive discussion on how monitoring really works under the covers in both UCS Manager and Standalone C-Series Servers. In this session we touched on best practices, recommendations, demonstrations, and pointers to relevant reference documentation for monitoring Cisco UCS Servers.
It's a known issue with our documentation team, and they are working to fix it ASAP. Keep watching the link, as it is correct, we are just working on fixing the backend issue.
I have some older N20-C6508 chassis, which I understand are still supported. I would like to run UCSB-PSU-2500ACDV PSUs on the same chassis as UCSB-PSU-2500ACPL PSUs. Is this possible? Or is it at least possible to keep the chassis runni...
view more
Hi Experts,
Actually, this question is directed squarely at the HyperFlex developers, so if you know anyone in that camp, please ask them to read this.
The question:
Do Snapshots contribute to the deduplication savings in HXDP?
The evidence I've gat...
view more
Hi dear Does anyone know how i configure unsupported transceivers on a FI? For a catalyst switch the command would be "service unsupported-transceivers" what would it be for the FI CLI? Have a great day
Hi,I'm having an issue configuring and accessing the CIMC on a UCS-E160S-M3/K9 running inside a Cisco ISR 4351.I have it configured like this:ucse subslot 1/0imc access-port shared-lom te2imc ip address 10.199.30.5 255.255.0.0 default-gateway 10.199....
view more
I'm about to go insane here. I've installed esxi 6.7u1 on my c210-m2, however the bios only detects the flash drive as bootable if I boot the installer ISO first and reboot. I've tried both legacy & uefi bios and no dice, doesn't appear in the BIOS as...
view more