probably a real stupid quesiton...i have successfully backed up a config from an old 3560 cisco 48 port switch.  simple commands, copy start tftp, then follow the prompts.  all tihs after setting up proper ip addresses and masks and ensuring that the...

a bit confused, so what version of IOS am I running?  I see 16.12.04 and 16.12.4.  i see the name of the ios as cat9k_iosxe.  thanks. show verCisco IOS XE Software, Version 16.12.04Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IO...

HI All On an access switch with no routing protocols turned on.  why would there be an default route command?  (ip route 0.0.0.0 0.0.0.0 192.168.1.1)  there is a routed port on the switch with the ip add 192.168.1.2/24. my thought is you need a DEFAU...

Hey All I'm swapping a cisco 3650 for a new cisco 9200 switch.  the existing switch connects to an ASA, and then also connects to other switches.   I unplugged the old one and plugged in the connections to the new switch.  I could not get internet co...

Hi All Got a weird one for you.  thought someone on here might have an idea of what is going on or can point me in a direction.   haven't seen this before.   interface is active, connection is up.  nothing is listed in the log for the switch on gig1/...