About yuanqiao58820

yuanqiao58820 · 04-29-2023

According to the configuration guide https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/security/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Security_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Security_Con...

yuanqiao58820 · 03-30-2023

Does C9500-48Y4C-A support both SFP and SFP+ RJ45 module? Have checked the https://tmgmatrix.cisco.com/?npid=50 Cisco Optics-to-Optics Interoperability Matrix for combability, it is on the list. But from Cisco commerce online configuration, there is ...

yuanqiao58820 · 08-08-2022

Hi friends I have deployed several FTDs in the network, but there is a problem with registering these FTDs through the internal network. Routing information and firewall ACL need to be configured. What is the IP address of the relevant CSSM registrat...

yuanqiao58820 · 07-17-2022

After deploying FTDs managed by FDM, I was very confused about the new Cisco SAMRT license registration and SynConization. After registering these FTDs on CSSM, network connection was cut off, but the information displayed in the FDM Smart license me...

yuanqiao58820 · 07-14-2022

Hi As the FTD configuration will be wiped out during migration from FDM to FMC managemanet, can I save the configuration based on FDM GUI and recover it later on FMCv platform? Thanks Yuan

yuanqiao58820 · 06-14-2023

Just one more question regarding this issue: Is there any obstacle to configure MACsec between Nexus and catalyst Switches? Many thanks in advance.

yuanqiao58820 · 04-10-2023

Thanks a lot. will keep it in mind.

yuanqiao58820 · 11-07-2022

Is it https based traffic? tcp 443? We need to minimize external threats from the internet. We can register FTD to CSSM as an instance, but VBD update is interrupted. Any information regarding FQDN or IP address need to be whitelisted? thanks

yuanqiao58820 · 08-16-2022

Thank you very much for help. It works now, but it is strange that only the primary FTDs of the HA pairs are synchronized with CSSM, based on the instance displayed in smart accounts.

yuanqiao58820 · 08-11-2022

It might casued by the default syncro gateway of management, which has been set via data interface but not working, cannt receive any register packet from FW in the path.

Member Since	‎06-03-2020 01:27 AM
Date Last Visited	‎05-08-2024 12:01 AM
Posts	17
Total Helpful Votes Received	1

User Statistics

User Activity

Does Nexus switch breakout port support MACsec?

Does C9500-48Y4C-A support both SFP and SFP+ RJ45 module

Cisco CSSM IP address for FTD

Fdm Smart license synchronize question

Config revocer after migration from FDM to FMC

Re: Does Nexus switch breakout port support MACsec?

Re: Does C9500-48Y4C-A support both SFP and SFP+ RJ45 module

Re: Cisco CSSM IP address for FTD

Re: Cisco CSSM IP address for FTD

Re: Cisco CSSM IP address for FTD