I have a 506e and I would like to forward all SMTP and POP3 traffic to our Exchange server. The IP Address of the unit is 192.168.1.1. Can someone explain to me how to set up a port forward for this unit.Thanks in advance,Tripp K.

I have a very simple problem. My Pix506e can ping everything on both sides of it, but my LAN side cannot get to anything on the WAN side of the PIX. I figured that my default route must be incorrect, but I followed the instructions correctly. Can ...

I would like to allow an IP range to access my server (which is on port 1 of a Cisco Catalyst 3550) If the range that I want to allow is .1 - .51, would I create the Access List to look as follows:access 1 permit 192.168.168.1 0.0.0.63and then wher...

I am creating a simple access list on a Cisco Catalyst 3550 :access 1 permit 192.168.168.254access 1 deny 192.168.168.35Then I apply it to the specific port:access 1 inBut I can still ping IP address .35 from the machine on the port in question and f...

I would like to create an Access list that blocks an IP range from .100 to .139. Could someone give me some information on how to do this, or perhaps send me some links on how to get started.Thanks,Tripp