About liviu.gheorghe

liviu.gheorghe · 03-03-2024

Hello, Has anybody installed the Enterprise Agent on Ubuntu 22.04? The documentation states that supported Enterprise Agent Operating Systems are: Amazon Linux 2Red Hat Enterprise Linux and CentOS 7Red Hat Enterprise Linux 8Red Hat Enterprise Li...

liviu.gheorghe · 10-21-2006

Have a Cisco ASA 5510 Appliance Anti-X Edition Bundle and I've configured it as a transparent firewall. Traffic from the inside to outside works fine, but from the outside to inside it isn't working. IP access list applied on the outside interface.An...

liviu.gheorghe · 02-27-2004

Has anyone seen this message:The bridge-group command is unsupported on the interface:Serial2/0:0.24 when the MPLS feature has been enabled on the main interface or one of its subinterfaces:Serial2/0:0.2 It used to work in 12.2, but after upgrade to ...

liviu.gheorghe · 12-03-2003

Hello,I saw that CWSMS-2.0 : Service Management Solution 2.0 WIN/SOL; SLM & Collection Mgr is EOL. Does someone know what product took its place?Thanks

liviu.gheorghe · 02-04-2025

Hello @ramziabdelhak , You can upgrade directly from 17.9.x to 17.16.x - https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-16/release-notes/rn-17-16-9800.html#Cisco_Concept.dita_59a2987f-2633-4630-8c7b-a8e8aecdeaf7 For the licensing p...

liviu.gheorghe · 02-01-2025

@fabios , you should not forget about the two antennas required for the EHWIC-4G-LTE-G to function properly. I have a similar setup - a EHWIC-4G-LTE-G module on a Cisco 1921 - with both antennas (main and AUX) connected and the radio performance is v...

liviu.gheorghe · 01-31-2025

Hello @akualisel , as far as I know, proxmox is not one of the supported as a virtualisation platform. Here is a link with the supported installation options: https://developer.cisco.com/docs/modeling-labs/system-requirements/ HTH

liviu.gheorghe · 01-29-2025

@antisocial11224 , you don't need the rotary command on the async lines because the functionality to access it with port number 2000 + async line number exists even without the rotary command configured on it. The rotary command enables a new range o...

liviu.gheorghe · 01-29-2025

If you have a Cisco router as your home gateway, you could use timed access-lists to restrict traffic to those sites during off hours. It's not an ideal solution because both sites you mentioned have more than one public registered IP address and tho...

Member Since	‎06-10-2002 05:46 AM
Date Last Visited	‎02-04-2025 03:16 AM
Posts	1,097
Total Helpful Votes Received	368

User Statistics

User Activity

Enterprise Agent on Ubuntu 22.04

Transparent firewall

MPLS and bridging over FR

Service Management Solution 2.0

Re: WLC 9800-L-C-K9

Re: Repurposing a Cisco1921 for LTE networking

Re: CML Free Tier - Server Disconnected

Re: terminal server

Re: Is it possible to allow certain ip access to sites with time limit