If shared memory both on active and standby CA is corrupted and backup shared  memory data is unstable then only way to recover shared memory is using EMS DB. This will cause outage in system that's why should be implemented out of busy hours.Here is...

Here is the step :su - oracledbadm -C db......................Number of tables to be checked: 195Number of tables checked OK:    195Number of tables out-of-sync:   0If there were out-of-sync tables then the prosecure to fix it:1- Login to EMS side th...

One of the biggest problem with BTS 4.5.1.v14 is db mismatch between EMS and CA. Most of time the sync command on EMS CLI does not solve this issue.Here is the prosedure to solve this issue :1-  Log into Active EMS with btsadmin and run audit databas...

For ISDN backhauling following configuration can be used on PGW. Here the MGW ip address is 10.1.1.59, MGC ip addresses are  10.254.254.2 and 10.254.254.3. UDP 9000 is used as backhaul port.On gateway E1 6/2 is controlled via PGW. The trunk group num...

If remote end is 3rd. party and terminating side is AS5400 it is a chance that DTMF send from remote end not understood via terminating side.LegacyPBX == ISDN == AS5400 ---- H323 --- BTS10200 --- H323 --- Quintum -- FXSHere Quintum is originating , A...