Somebody using cFlowd to sent netflow from cisco sdwan to netflow traffic analyzer? I have a problem. I found out that cisco security network analytics show incorrect traffic when device send netflow with configuration cflowd.For example:Device sent ...

I found out that sdwan cEdge works only with ospf area 0, but it strange, maybe someone knows why?

Hello, I try to use option from stealthwatch to find network scanners. I started ping scan from my PC. After a while I saw that I have Top Security Event for my host  Ping_Scan with CI = 590,400, after it I went to Report - Visibility Assessment - In...

I establish ipsec tunnel from sdwan cEdge to cisco legacy router from vpn 0.  interface Tunnel100001 ip address 172.17.8.73 255.255.255.252 ip mtu 1400 ip tcp adjust-mss 1360 tunnel source GigabitEthernet0/0/1.938 tunnel mode ipsec ipv4 tunnel ...

Hi, after enabling ip device-tracking for ios devices:2960 Plus29602960X2960SI found that my cisco phones can't resolve arp for other cisco phones:My config was:sh ip device tracking all IP Device Tracking = Enabled IP Device Tracking Probe Count = 3...