About melindacorrell

melindacorrell · 11-17-2008

I have a Catalyst 2960. I've got the port speed set to auto, and the speed and duplex on the NIC (HP NC373i Multifunction Gigabit) on the other end of the cable is set to auto. According to the docs, it should negotiate at 1000mbps full, but it res...

melindacorrell · 11-17-2008

I solved the problem, so I thought I would share what worked for me. On the NIC, Autoflow was set to disabled. Apparently, this setting should be auto for 1000 speed. I reset that and was able to get the link to some at 1000 full with both sides s...

melindacorrell · 11-17-2008

Guiseppe,Thank you. It's a new Cat6 straight cable that I'm using. I'm not sure what you mean by "Sometimes I've seen that a simple shut / no shut cycle on the port can help to get a successful negotiation"??Melinda

Member Since	‎11-17-2008 09:41 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	3
Total Helpful Votes Received	1

User Statistics

User Activity

link won't auto negotiate to 1000mbps

Re: link won't auto negotiate to 1000mbps

Re: link won't auto negotiate to 1000mbps