About niesommer

niesommer · 04-28-2012

Hi,Does the Cisco RV180 firewall/router support DHCP client on the WAN interface? This is specifically mentioned on the DHCPv6 client, however, it is not mentioned for the IPv4 client. I'd like to set it up using my cable modem in bridged mode conne...

niesommer · 08-27-2008

Hi,I'm need to authenticate users authenticating either on a TACACS+ or a RADIUS server on a Dial-up line. The configuration that I'm using is:aaa authentication login TEST group radius group tacacs+ local-caseThe problem that I'm encountering is tha...

niesommer · 08-01-2008

Hi I'm trying to solve the following problem:I use ACS for admin auth & accounting to network devices and I want to differentiate what devices users have access to. In my network I have about 2500 network devices and instead of adding all of them to ...

niesommer · 02-11-2008

Hi,I've installed a new SSL certificate to replace the old one which was about to expire. After this cert update I can no longer access the ACS server for admin purposes. I get the error "Can not establish cifered connection because the certificate p...

niesommer · 10-02-2007

Hi,I have lost admin access from the network SSH / Web interface does not work after performing a password reset. I can only access the device through the console and using the default admin account. The VPN concentrator authenticates correctly the ...

niesommer · 05-02-2012

Thank you very much!I actually found it in the manual, I overlooked it the first time I read the manual.It should hopefully be on its way to me shortly Cheers,NielsSent from Cisco Technical Support iPad App

niesommer · 08-05-2008

Thanks for this JG.I was looking, not happily though, forward to exporting the dev DB, manipulating it and importing it using scripts but this RDBMS sync function seems to have cut this work down quite a bit.The network solution would be too much man...

niesommer · 03-25-2008

On 3.3 I didn't have to reinstall any configuration. What the Registry value change does is simply remove the SSL session encryption and that leaves the HTTP available. Once restarted the CSAdmin service I could connect using HTTP and then install a ...

niesommer · 02-22-2008

Thanks JG!! After changing the value and restarting the CSAdmin service I finally got access to the ACS app.Cheers,Niels

niesommer · 02-20-2008

JG, I will try this asap, and let you know. Thanks for this. The version is 3.3.4b14? tha last supported patched version.Cheers,Niels

Member Since	‎04-13-2007 06:59 AM
Date Last Visited	‎02-26-2021 07:29 PM
Posts	12

User Statistics

User Activity

RV180 DHCP IPv4 client working on WAN interface?

TACACS and RADIUS authentication on same line

Wildcard AAA Client in ACS4.1

ACS 3.3 invalid or corrupt SSL cert installed

Unable to access VPN 3030 after IP change / Password Reset

Re: RV180 DHCP IPv4 client working on WAN interface?

Re: Wildcard AAA Client in ACS4.1

Re: ACS 3.3 invalid or corrupt SSL cert installed

Re: ACS 3.3 invalid or corrupt SSL cert installed

Re: ACS 3.3 invalid or corrupt SSL cert installed