I was able to find the defect from the install log portion you posted.As for the fix the only other way without tac support would be to upgrade to the UC version that does not encounter this defect. Then the subscriber should install without failure.

Alonzo,Looks like you are most likely hitting the following defect:CSCue78730you will need to open a tac case so the workaround can be performed by a TAC engineer.Hope this helps.

Call control is performed by the CUCME at the remote site or the SRST ccm server that is setup at the remote site. The remote site UC server can be setup with either sip or sccp call control.I mainly deal with the UC side setup of this feature so I a...

Hello Mike,There are three topologies that are supported for SRSV with UC. All three are listed in the link below:http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/srsv/guide/9xcucsrsv010.htmlWe do not outline a preferred topology or integr...

For maximum users you must refer to the guide below on system requirements:http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/supported_platforms/8xcucspl.htmlEach server hardware and platform overlay has its own limit on how many users can ...