About sdheer

sdheer · 07-04-2012

Introduction:OUTPUT DROPS:INPUT QUEUE DROPS:HOLD-QUEUE IN:HOLD-QUEUE OUT:Related Information: Introduction:In this document you will learn about some basic terms like OUTPUT DROPS, INPUT QUEUE DROPS, HOLD-QUEUE IN and HOLD-QUEUE OUT.OUTPUT DROPS: Eve...

sdheer · 08-30-2011

Hi Sandeep , The baseline CPU utilisation for 4500 switches is around 40 % , so you do not need to worry about 45 % cpu.You can check teh same in the below doc:http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15....

sdheer · 08-16-2011

Hi Dan,Input and CRC errors are the indication of the physical layer issue ie bad cable, bad port , bad GBIC or patch panel.Please check the above in case teh input error or the crc are incrementing . Also please let me know if you have qos configure...

sdheer · 08-04-2011

Hi Brian,Seeing the input errors or teh CRC errors are not related to the VM instance specificallyCRC and input errors increment when a device recieves corrupt frame from the other end.This is a indication of the physical layer issue ie bad cable or ...

sdheer · 08-03-2011

Hi Randy,Overruns are basically caused dut to the flow control done by the ports and the fabric.The concept behind overruns is when the packets coming from any interface goes to the fabric at such high rate that fabric is not able to handle them all...

sdheer · 06-02-2011

BPDUs are open standard that can be on other 3rd party switches as well

Member Since	‎09-21-2010 12:28 AM
Date Last Visited	‎08-24-2017 12:55 AM
Posts	112
Total Helpful Votes Received	216

User Statistics

User Activity

Output drops ,Input queue drops & Hold queues

High cpu utilization in 4507R-E

Input errors/packet loss on intersite ethernet link

VM trunk port errors

Interface overruns and WRR queuing

Re: Are BPDUs Only on Cisco Switches?