i have pix 535 and wanted to erase the flash files (faulty) which already utilised 13 mb .so i cant upload new iosso i want erasedisk.bin ,i also have CCO account pls mention me the link
i have css 11506 which was in the working condition few days before .because of maintanance work it was kept power off for 12 days .And today when we started it it failed to boot ,we even cant get console.it is showing the led of each module is in bl...
I have two Cisco ASA 5520 firewalls (Active/Standby) running with software version 8.2(1)11 version I have encountered a problem while saving the configuration . The memory utilisation is hig 84%So, I have issued some commands to see the memory uti...
i have 5520 ASA ,i am unable to write config in startup ,means it gives error on issuing wr mem command.i am able to add or modify the rulesthe cpu usage is showing around 30 % while the memory usage is high above 80% as has 512 memory installed
for my one of the setup i have two pix 535 configured in active -standby mode .i want to insert the interface card on both of the firewalll without disturbing any services or rather you can say zero downtimebut acoording to the documents i suspect i ...
go to services by issuing command services.msc in command prompt Stop the Cisco Systems,Inc.VPN service Stop the Internet Connection Sharing (ICS) serviceRight click on ICS service and choose Properties. Then change Startup type to Disabled or Manual...
thanks,i had gone trough that document earlier while posting the issue.by the way i found that was a hardware issue with SCM module .logged a call to cisco
