Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Given that we are in the AI era, why not integrate the Cisco community with an AI tool that allows users to ask questions and receive results based on previous posts that already have solutions?
This provides more frequently asked questions that are ...
VIP member can search his own post and solutions - we get lot of responces, some time its hard to track our own solution, which may be helpfull to give reference on some post, so its good to have own post and solution search based on username,
Lock or Close the new thread or exiting thread - which has no reply or no response from OP more than 15-30days, Lock it (i suggest to close it), Orginal User can open new one referring the Old post.
Its been 2 days i have been observing that pages keep loading even though page loaded, Looks like its still try to get some content on the background - i tried different browsers same issue (is this me also every one at community ?)
see the circle ( ...
Based on your topology and the symptoms provided, the most likely cause is an LSP (Label Switched Path) or MPLS forwarding break between AGDM and the 4YOL router, despite the BGP control plane working perfectly.
Because MSE-02 receives and installs b...
No, directly extending and trunking the legacy AP management VLAN from the legacy core down to a Fabric Edge (FE) node is not a viable or supported design.
check some reference guides :
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Campus/E...
Your Gigabit Ethernet link is currently working because Cisco’s cable diagnostics tool (TDR) has a known quirk: running a cable test on a live, active port will frequently report Pair D as "Open" or "Short," even when the cable is perfectly fine. thi...
Not sure you're able to get that one, as far as I know.
https://sketchfab.com/3d-models/c9200cx-12p-2x2g-c0eb68411eb749199ff94b1d72ab586e
You already have the installation guide :
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/hardwa...