Ok. I really need some help. I currently have (2) two 6509's, each of them have an MFSC card and (2) two 48 port blades. All of the ports on the blades are broken up into seperate vlans. As shown in the following:interface Vlan1 description Manageme...

I currently have (2) 6509's each has an MFSC card and (2) 48 port blades. All the ports on both blades are broken up into seperate vlans. There is an ISL trunk between the (2) 6509's. I need to extend the vlans out from the 6509's to (2) 2950 switch...

I could really use some help on this one... I need to know how to configure SNMP on VLAN's, the host on these VLAN's also happen to be nated. From the bottom up here is the layout of the infrastructure; (2) 6509's w/mfsc cards& (2) 48 port blades all...

I could really use some help on this one... I need to know how to configure SNMP on VLAN's, the host on these VLAN's also happen to be nated. From the bottom up here is the layout of the infrastructure; (2) 6509's w/mfsc cards& (2) 48 port blades all...

We currently purchased Cisco & QPM in order to manage and shape traffic to our clients. Our clients sit on their own vlan's off of (2) 6509's. Each client has a full class C nated network space. We need to shape traffic to and from these networks. W...