Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
- FYI : ( Courtesy and tx for sharing @DarchisNicolas on X) : https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/223061-migrate-to-wi-fi-7-and-6ghz.html
M. ...
- @Wilferson Cabreja Del Rosario Also have a full power cycle for those APs usually achieved by shutting down the port for a POE based access point followed by 'no shutdown' with a short pause in between ,
M.
- @Wilferson Cabreja Del Rosario If it's only few : check port counters on the switch interface for the APs, also check if expected speed of 1G could be established ,
M.
- @Wilferson Cabreja Del Rosario 1) Use instructions from https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/17-4/config-guide/ewc_cg_17_4/enabling_syslog_messages_in_access_points_and_controller_for_syslog_server.html ...