About Vaijanath Sonvane

Vaijanath Sonvane · 08-27-2024

Hi All, Looking for some answers related to e164 entries on Cisco 8300 (C8300-1N1S-4T2X): How many voice class e164-pattern-map are supported?How many e164 entries are supported under voice class e164-pattern-map using CLI?How many e164 entries are s...

Vaijanath Sonvane · 05-03-2023

Vaijanath Sonvane · 03-23-2023

Below procedure describes the steps to restrict Outgoing Calls from User/Workspace Phone registered with Webex Calling: 1. Login to Webex Control Hub 2. If you want restrict outgoing calls from User’s desk phone then go to Users >> select User >> se...

Vaijanath Sonvane · 01-18-2023

This article explains Cisco CUBE commands to check number of active calls, call details and call count. Effective from Cisco IOS XE Amsterdam 17.2.1r, CUBE status display is enabled without configuring mode border-element license capacity sessions c...

Vaijanath Sonvane · 08-03-2022

Need some help from Webex Calling Experts: Customer is looking to add their department main number as an alternate line on multiple phones. This line will show up as a second line on these phones. Some users want this line to ring on their device and...

Vaijanath Sonvane · 01-13-2025

Hi @Michalis Papasavva, If the user is deactivated in control hub, it will still show in the webex app. There is no option to disable it. Once user is deleted from control hub after 30 days (default) then it will disappear from webex app. You can cus...

Vaijanath Sonvane · 01-07-2025

Hi @Faisal Saoud, Yes, you need SNR configuration on CUCM to allow calls to ring simultaneously on both CUCM device and MS Teams Client. The best practice is to enable SNR on only one platform (either CUCM or MS Teams) otherwise it will create a call...

Vaijanath Sonvane · 01-02-2025

Hi @madhav.kumar.bhardwaj12, 1. Yes, you can use this port range. 2. This is how I have deployed SBCs for customer with 1:1 NAT. The public DNS record must have SBC FQDN with NATed public IP Address. 3. As the SBC router is behind the firewall, we a...

Vaijanath Sonvane · 01-02-2025

Hi @Jose Lopez, Is FXS port configured in CUCM or is it programmed on CUBE?

Vaijanath Sonvane · 01-02-2025

Hi @madhav.kumar.bhardwaj12., Most Cisco documentation specifies that RTP & RTCP traffic will use a dynamically chosen port number in the range 16384 to 32767, with RTP using an even port number & RTCP using the subsequent odd numbered port. However ...

Member Since	‎06-12-2009 12:29 AM
Date Last Visited	‎01-13-2025 05:55 AM
Posts	1,450
Total Helpful Votes Received	2653

User Statistics

User Activity

Cisco 8300 E164-Pattern-Maps Entry Limitation

AudioCodes MP-124E Analog Gateway Configuration with Webex Calling

Webex Calling - How to Restrict Outgoing Calls from Phone

How to check active calls on CUBE Router?

Alternate Telephone Number on Multiple Webex Calling Devices

Re: Webex - deactivated accounts

Re: MS Teams with SBC Forking Call

Re: Cisco SBC Signal and media port range

Re: Block number base source.

Re: Cisco SBC Signal and media port range