Hi Experts,
we have L2 EVPN vxlan fabric. our multicast source is connected on VTEP-1 and receivers are connected ion VTEP-2.
Both source and receivers are connected via access switch(L2) to vxlan network
i can see IGMP group on access switch but n...
Hi Experts,
we have l2 vxlan evpn network.The l3 of the end-host is configured on nexus7k.what we notice that the end-host not able to reach to gateway I.e VIP HSRP.
When we clear the ARP on the gateway it started working.
My question is if ARP supr...
Its expected behavior as ping reply coming to different vpc pair leaf. I dont know why you want to establish such neighbourship , you can explain in more detail the use case. But in general the recommendation is dont do neighbourship over vpc as its ...
You cant have multiple IPs for data and mgmt in ND cluster. You need to have to have communication between the ND cluster L2 preferred.I would say keep the ND data and mgmt out of your network like OOB. There is not correct document but this document...
L2 TRM for EVPN fabric - can you share the configuration requirement for this please ? in below configuration guide i didnt find any :
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-8/configuration_guide/vxlan/b_1...
I found the command - show ip device-tracking database
This command will show you if ARP is dropped by vxlan fabric or it forward as unicast packet to destinaiton VTEP where gateway is configured.
Thanks
