Important notes:
Available for ESXi 5.5 and later.
This feature only captures packets in one direction and defaults to inbound.
You can run a capture on the physical network card, vmkernel, or the virtual switchport of a particular virtual machine...
How does it work? The branch Gateway downloads a music file from a TFTP server into its flash memory & references the file every time a local IP phone request MOH services.This configuration can be helpful in the following scenarios:If you have a mu...
Sometimes, you may want to change the NTP source of your Cisco Unified Communications Manager. Here’s some information that might help with the procedure.To view your current NTP configuration:To test NTP reachability, clock drift & stratum:Notice th...
STCAPPSTCAPP feature allows CUCM to control analog phones through FXS ports in a Voice Gateway. This is done using SCCP protocol, so at the end, the analog port (FXS) will register to the CUCM server.PrerequisitesCisco IOS 12.3(11)T or later in Voice...
Hello everyone, I had this same issue. To fix please do the following:Boot-order will look something like this:- Option # 1 EFI shell- Option #2 Virtual CD drive- Option #5 HDD.Make HDD option #1 and rebooted the server....
Hello Ryan,I'm sorry to hear about the hard time you're having. Unfortunately the goal you are trying to accomplish isn't feasible without some type of call control server (CUCM). The Cisco ATA isn't an intelligent device. Its main goal is to transf...
Hey Mike,Great Question. This bug has actually already been fixed.The fixed release 9.2(3)SR1 is only available through TAC. You would have to open a case via phone or visit cisco.com.Other known Bugs that you could ask TAC about are:CSCtz22064 - ATA...
