About baselzind

baselzind · 12-18-2024

our Kiosks team are saying the below jitter is the cause of their system issues that include payments. could it be or it is just the classic network fault thing? Pinging X.X.X.X with 32 bytes of data:Reply from X.X.X.X: bytes=32 time=26ms TTL=124Repl...

baselzind · 11-02-2024

we usually apply allowed vlan list on trunk port between the core and the edge switch in the floors and branches , but what about the switches connected to the edge switch? am i supposed to apply also allowed vlan? as it would be very tedious incase ...

baselzind · 07-14-2024

The application team are saying this statistic proves that the application slowness is network related but i need help if someone can understand it and confirm it as i can see average wait time is 3ms which isn’t slow

baselzind · 07-04-2024

I have two questions please , I have a server that uses 9000 mtu is connected to a layer 2 switch port (access vlan port) and the switch port is showing 1500mtu , how is it able to work with a mtu mismatch? second question is that i have a layer 2 Hu...

baselzind · 05-23-2024

I have a new server with sfp intel E65689-005 that i need to connect to my C9410R with switch module C9400-LC-24XS . i need to know if the intel E65689-005 sfp is compatible with cisco SFP-10G-SR-S? the intel E65689-005 sfp specs are as below: -Suppo...

baselzind · 01-18-2025

it turns out the jitter isn't the root of the issue rather some packet drop from the switch due to layer 1 issue , after solving the layer 1 issue the problem stopped.

baselzind · 11-04-2024

thanks alot for the input however that wasn't what i wanted to ask , my question was based on your example if i made "allowed vlan" "that includes all the vlans used in the sw1-5" on the link between sw1 and the core , do i need to also configure all...

baselzind · 11-02-2024

thanks for the input however what i meant is does applying allowed vlan between core and the direct edge switch only , is enough to limit loop damage and also reduce vlan broadcast to all the switches behind that first edge switch?

baselzind · 07-17-2024

according to the application guy the DB has two DB and these two pull information from two DB and he wont specify which DB is the one related to the slowness , so how can i packet capture from 2 sources and 2 destinations? also the problem happens ra...

baselzind · 07-17-2024

thanks for the input , but from what i understood the application is in the DMZ zone and the application have two DB in the inside and when those two DB pull information from further two more DB in the inside , that is where the slowness occur which...

Member Since	‎10-28-2014 03:15 AM
Date Last Visited	‎12-23-2024 07:25 PM
Posts	1,127
Total Helpful Votes Received	207

User Statistics

User Activity

would this jitter cause instability in a payment kiosks?

trunk allowed vlan on ports beyond the core?

help with DB slowness

MTU on layer 2 interfaces?

help with sfp compatibility

Re: would this jitter cause instability in a payment kiosks?

Re: trunk allowed vlan on ports beyond the core?

Re: trunk allowed vlan on ports beyond the core?

Re: help with DB slowness

Re: help with DB slowness