I am looking for a solution to an issue I'm having. I currently have a 5520 WLC that has a SSID for a hotspot on it. I have tried to setup a captive portal page for users to simply accept the AUP. As soon as they agree they get access to the internet...
Good day all,I have been tasked with providing a recommendation for securing a specific server on our network. Our network is Cisco Centric, hence being here. As it stand I have a 3560CX switch connected to the server. From that switch it goes to a 4...
Good day all,I am trying to resolve an issue we currently have. I have one connection coming from our ISP into a 3650 switch that feeds out 2 x 1GB SFPs and 1 10GB. The connection from the ISP goes into the distribution switch as we supply other enti...
Looking for a little help in regards to a problem I have. I need to feed an internal AP 2802 from my 1552 on the outside of the building. The 1552 is part of a Mesh grid over a bunch of buildings. I have added a 3560 switch before the inline power. T...
Looking for advice. I am the only network guy in a small-medium sized business. Currently have OSPF running on all switches, including the access/edge switches. I have 3 core switches in a triangle design. Each of those feed the access switches in d...
Sorry everyone, my bad, I've been so busy and this was resolved quickly when our tech went to the site to see how the printer was configured. The default-gateway was wrong. Thanks for all the help.
I did a packet-trace on this and it gets stopped here Phase: 4Type: WEBVPN-SVCSubtype: inResult: DROPConfig:Additional Information: Forward Flow based lookup yields rule: in id=0xcaf60558, priority=70, domain=svc-ib-tunnel-flow, deny=false hi...
Abaji,I only want the actual traffic for the 192.168.1.0/24 network to go over the VPN. All other traffic needs to be sent out via the local lan.Unfortunately I'm not sure how to setup a static route for all anyconnect clients.Currently when I connec...
Reza,Thanks for your information, I guess a better understanding of what I am trying to do would help. I will have a leg of the ISE server in both networks, so I will create a separate VRF for the ISE server, I will also create a DHCP server for the ...
So, further to this, I grasp the VRF inside, but when it hits the ASA even on separate ports how does it distinguish between the interfaces. I have VPN clients that connect to the one network but there will be none on the other network. I guess you c...
