About Jerome BERTHIER

Jerome BERTHIER · 09-26-2024

HiQuestion about QOS on ASR1K series.It supports only egress queuing. So service policies dealing with shaping are usable only on output.In a design with asymetric bandwidth between interfaces (1Gbits to 10Gbits or 10Gbits to LAG 2x10Gbits for exampl...

Jerome BERTHIER · 04-29-2024

HelloI need to export all events from level informational from an ASA5508 to a syslog server. Basically, I set it as "logging trap informational"This device provides firewall services as well as remote SSL VPN access and WebVPN.I noticed that AAA and...

Jerome BERTHIER · 03-15-2024

[Edited on March 16th to add details]HelloI was a bit confused about the traffic ports used by mobility on WLC AireOS or IOS-XE.Trying a quick review of traffic ports used by mobility :AireOS IRCM other than 8.5 IRCM or 8.8.111 and latersince this do...

Jerome BERTHIER · 11-10-2020

Hi I think that there is already a way to differentiate platform when deploying AC from WebLaunch on the ASA (assuming that the client has not already any AC version installed).You can bind a regex value condition with each AC package activated on th...

Jerome BERTHIER · 05-29-2020

Hi, I'm looking for accurate documentation on how the AnyConnect duid is generated.If I look at DART cli options, there is two ways to print the uid of a device :-u, -udidDisplay global unique device identifier information.-ul, -udid_legacyDisplay un...

Jerome BERTHIER · 09-26-2024

No. Declaring same QOS is no need anymore on port member. You can set it at Etherchannel level. See "agregated Etherchannel QOS": https://www.cisco.com/c/en/us/td/docs/routers/ios/config/17-x/qos/b-quality-of-service/m_aggregate_etherchannel_quality_...

Jerome BERTHIER · 09-26-2024

Sorry but since to my readings, without shaping, there is no queuing and scheduling. So how could you manage priorities in case of congestion ?Even on same to same bandwidth, you can face congestion and need priorities.

Jerome BERTHIER · 09-26-2024

Hi JosephI cannot manage QOS on upstream equipments.So in my example, if you look at path 1, yes it's a path where egress interface bandwidth is faster than ingress interface bandwidth. But as ingress queuing doesn't exist on ASR1K, how do you deal w...

Jerome BERTHIER · 06-18-2024

HiI had a feedback. The documentation has been fixed. Now it states :"UDP port 5246 and 5247 are for CAPWAP between AP and controller. Encrypted mobility uses UDP 16666 for control and UDP 16667 for data (either encrypted or plain). EoIP IP 97 is for...

Jerome BERTHIER · 05-12-2024

Feedback posted. I'll get back with Cisco answer.Regards

Member Since	‎10-28-2010 06:55 AM
Date Last Visited	‎10-24-2024 01:37 AM
Posts	126
Total Helpful Votes Received	144

User Statistics

User Activity

QOS ASR 1K - asymetric path bandwidth

ASA5508 syslog issue - classes session vs auth/webvpn events

Mobility traffic ports

CSCvw38645 - Ability to differentiate between ARM64 and normal ones when deploying AC automatically (web-launch)

AnyConnect - DART - duid is not unique per device

Re: QOS ASR 1K - asymetric path bandwidth

Re: QOS ASR 1K - asymetric path bandwidth

Re: QOS ASR 1K - asymetric path bandwidth

Re: Mobility traffic ports

Re: Mobility traffic ports