About ciscovoipsupport

ciscovoipsupport · 10-23-2019

Hi Everyone, I am looking for a sample configuration on Cisco CUBE acting as SIP Proxy. Specifically "End to End Mode" with "Registrar Challenging the Register Request" Scenario as shown below. EDIT: Objective is to not store any username or passwor...

ciscovoipsupport · 03-04-2019

Hi Guys, Is it possible to call from one FXS ext to another FXS Ext on same Cisco router without CME. E.g. 100 is calling 101. !dial-peer voice 1 potsdestination-pattern 100port 0/1!!dial-peer voice 2 potsdestination-pattern 101port 0/2!!voice-port 0...

ciscovoipsupport · 10-16-2018

Hello experts, I am running normal SIP Phones 7945 and 7965 on CUCM 8.6. I am trying to use a SBC (SIP based) to do the registration in SRST mode. This SIP SBC is cable of accepting REGISTER request. When the WAN link goes down the IP Phone sends r...

ciscovoipsupport · 10-10-2018

Hello Experts, I could like to create a multi tenant environment on 3rd party servers. I would like to know if TAC support below configuration. HP server 1 (Geo location Area 1) 1. 3x CUCM Publisher (each cluster hosting 1000 users) 2. 3x Unity P...

ciscovoipsupport · 10-03-2017

Hi Guys, We have a customer production platform running on 8.6 and local internal IT platform running on 8.6. both are running on MCS sever. We wish to upgrade to BE7k which runs on C240 M4 rack mount servers. But we would like to segrigate IT from P...

ciscovoipsupport · 10-03-2017

does this mean i need two different CUCM linceses to run two different servers (VMs)?

thats not even right syntax.. · 03-07-2017

thats not even right syntax.. (config-class)#request INVITE sip-header From: modify "Anonymous <sip:anonymous@anonymous.invalid>" "916850 <sip:916850@72.69.12.2>" ^% Invalid input detected at '^' marker. right syntax thats accepted by router is ...

Does not work.. · 03-07-2017

there is only one voip dial peer on router.. i tried to apply it there.. still does not work.. how can we debug voice class sip profile?

ciscovoipsupport · 02-24-2017

its not working.. call filter match-list 1 voiceincoming called-number <number> outgoing called-number <number> debug condition match-list 1 exact-matchdebug ccsip messages show debug <shows filter is on> but show log is showing all SIP calls. I w...

ciscovoipsupport · 12-12-2016

May be your box has some find of firewall which is blocking? Try capturing packets using wireshark.. check if you see request from CUCM.. That way we can be sure its not CUCM or network inbetween..

Member Since	‎05-26-2013 11:52 PM
Date Last Visited	‎10-25-2019 12:02 AM
Posts	106

User Statistics

User Activity

Looking for sample Cisco CUBE configuration for SIP Proxy in "End-to-End Mode" using "Registrar Challenging the Register Request" Scenario

FXS to FXS Call on same router

Cisco SIP Phone in SRST Mode - 3rd party SIP Server with CUCM

Multi tenant CUCM 12.x - Hardware requirements

MCS to UCS C240 M4

Re: MCS to UCS C240 M4

thats not even right syntax..

Does not work..

its not working..

May be your box has some find