For testing purpose you can have policer for 100 MB which will controll the traffic so that it would not go beyond 100 MBhere is the sample configurationpolicy-map LIMITclass class-defaultpolice  100000000interface XXXservice-policy out LIMITshow pol...

Create a class-map to match Data Vlan Trafficclass-map match vlan <<">>Now create policy-map to mark the trafficpolicy-map class   ...mark the traffic as neededNow Apply the policy on the interfaces connected to 2911interface service-policy outp...

Class-map: voice (match-any)        49575139 packets, 10644477652 bytes         5 minute offered rate 0 bps, drop rate 0 bps         Match: access-group 105           49546103 packets, 10638278904 bytes           5 minute rate 0 bps         Match: i...

You have mentioned that you tried FRTS. Can you please confirm what configuration you had. It should have worked with FRTS. if you are not seeing any match  we may need to troubleshoot if the packets coming into the router are marked correctly.Here i...

Here is the response to the question:srr-queue bandwidth shape 0 0 0 The above command will calculate percentage of bandwidth for queue 1 based on the link speed (But not the interface bandwidth you configure).Eg:config tint gi1/0/1srr-queue bandwid...