There are a couple of things wrong on your code:1. TRANSFER action should be sent to the previous call, not the new call (use a second variable as prevdialog).2. sleeping will not work, you need to add a handler to your new call and whenever it goes ...
Hi,1) It all depends on your current versions, some of them will allow a direct upgrade from 7 to 9, check page 16: http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf 2) you can find it with all the CUCM docs at http...
As you said, there will be no CoS to check on the port, as it is an access and the CoS is only included in the 802.1q frames.If left as default, your switch will overwrite any DSCP/ToS value with 0, so make sure you use the mls qos trust dscp command...
The answer is easyLoad sharing is that you share the load, not balance it, like having redundant links uplinks and one vlan going over one uplink and other vlan on the other, statically configured.Balancing is dynamically having both VLANs over both ...