Thanks Marwan. Appreciate you starting the discussion. Please find below answers to questions you posted:Q. If there is voice traffic need to be given priority and FRR within about 50ms using MPLS-TE FRR where to place the TE ends between PEs or Ps ...
Hi John,From our question I understand you are sking about the MVPN support for IPv6 multicast. It is actually supported on the XR platform as of now. Please refer:http://www.cisco.com/en/US/docs/routers/xr12000/software/xr12k_r4.0/multicast/configur...
Hi,I guess the best you could do is groping first and third address together and second and fourth one together:access-list 1 permit 106.157.10.0 1.32.1.0------------------------------------------------------------This is what it matches:First Octet ...
Hi Siva,This looks to be like a bug as with SRD release I also do not see this option. I tried SRD6, However if I use SRE image I do get the option to debug a particular VRF. Refer command from SRE:debug bgp vrf test ipv4 unicast 192.168.1.1I filed a...
Hi Ravi,The traffic rate on interface vlan would only correspond to the traffic that would be routed. Any locally switched traffic that is coming in vlan 100 and going out vlan 100 would not be reflected on the interface vlan.Also, if you have multic...