About Scott Fella

Scott Fella · 05-01-2025

I have a Cisco ISE SNS-3655-K9 with CIMC vC220M5.4.3.2a.0_ISE. After uploading a public certificate to get rid of the certificate error when accessing the GUI of the CIMC, everything works, except when I try to look at the certificate or navigate to...

Scott Fella · 03-24-2023

I think having links to specific Cisco YouTube Channels would really help folks that visit the forum. This way, the Cisco team also has visibility and can read and answer questions. Example, the Wireless team has https://www.youtube.com/@getunplugge...

Scott Fella · 12-14-2022

I have a four node ISE 3.2 cluster in Azure, two PAN+MNT and two separate PSN's. My plan was to migrate off our old ISE 2.2 in our DC eventually. Currently I have migrated all our TACACS+ to our Azure ISE cluster with no issues. I started to test ...

Scott Fella · 06-11-2021

I'm running ISE 3.0 and and older version of ISE 2.2 which I have ran into some rbac issues. On ISE 3.0, is it possible to provide menu access to view the policy sets but not make any changes? I tried a few different ways, but seems to either allow...

Scott Fella · 02-16-2021

I want to understand if I can install ISE in a Hyper-V cluster using Storage Spaces Direct Hyper-V cluster, or would I just implement individual Hyper-V instances? The plan initially is to have 4 nodes, two PAN/MNT and two PSN's. There will be loca...

Scott Fella · 05-12-2025

Test the FTP with an FTP client and make sure that its working first, since you didn't setup the FTP server. If it works and ISE is still failing, I would delete the repository in ISE and create it again. There should also be a log on the FTP serve...

Scott Fella · 05-12-2025

We have the same setup per say, SSO with N+1. It's just best practice to define the primary, secondary and or tertiary controller, because you want to dictate that. Keep in mind since this is new to you, that ap's once joined to a controller will k...

Scott Fella · 05-10-2025

We have a secondary controller that is upgraded to using the correct firmware of C9800-CL to version 17.12.05. Should I migrate the APs to that controller first and try fix the Primary controller then? Is there a non-disruptive way to fix the Primary...

Scott Fella · 05-09-2025

If it was me, I would just rebuild the VM. Since its a VM, it doesn't take long to stand a new one up and then restore your configuration to the new VM. This way you can start fresh. You probably should standup a dev/test VM also so you can do all...

Scott Fella · 05-08-2025

What you need to know is that on a Cisco wireless, EWC or Controller, you just configure 802.1x, that is it. It's defined on the radius to allow EAP-TLS and or PEAP. As far as Windows is concerned, if configured for EAP-TLS and that fails, then use...

Member Since	‎02-28-2002 05:58 PM
Date Last Visited	‎05-11-2025 09:24 AM
Posts	27,213
Total Helpful Votes Received	19069

User Statistics

User Activity

After uploading a public certificate, Security Management hangs

Why not have links to specific Cisco YouTube Channels

EAP-TLS to Azure ISE is failing but not with an ISE node in the DC/LAB

ISE RBAC for Policy Set so team can view but not edit

ISE in a Hyper-V cluster using Storage Spaces Direct Hyper-V cluster

Re: ISE repository issue - Repository validation failed due to error -

Re: detailed breakdown of Access Point (AP) join procedures in SSO and

Re: Installed C9800-40 bin file to C9800-CL in error. Need fix to upgr

Re: Installed C9800-40 bin file to C9800-CL in error. Need fix to upgr

Re: 9120 EWC EAP-TLS support