About williamcunningham

williamcunningham · 09-20-2013

I have the following setup:2 SG300-20's with one VLAN (the default...we're a rather small network) set to L21 HP ProCurve L3 router/switch with two VLAN's (one for VOIP and one for LAN)The SG300-20 on the bottom of the rack has all the servers (about...

williamcunningham · 09-20-2013

I have the following setup:1 SG300-20 with all our servers (about 6) set to L2 right now.1 SG300-20 with all our workstations (about 12) set to L2 right now.1 Procurve L3 switch/router with 2 VLANS (one for VOIP and one for LAN)The bottom SG300 on th...

williamcunningham · 10-07-2013

Thanks Tom, that's exactly what it is. I double checked to make sure I didn't have any loops anywhere, then I disabled STP and it was back to 3 seconds or less. I'll check into the port fast option.

williamcunningham · 10-07-2013

Received the replacement for the RMA'd SG300 this afternoon. It's working much better than the one it's replacing. Solid so far. Only concern I have is that compared to the old, unmanaged switch I was using temporarily while awaiting the replaceme...

williamcunningham · 09-25-2013

Thanks folks. I had the same thought about switching the switches, but I don't want to bring down developers that are on the primary switch. I'll try to find some time to do off hours though.

williamcunningham · 09-25-2013

Sorry, yes. I mistakenly created two posts about the same issue as I wasn't aware of the post approval process. Please disregard this post in favor of the duplicate found here:https://supportforums.cisco.com/thread/2241120?tstart=0]

williamcunningham · 09-25-2013

I can uplink the two switches using a cat 5e between ports 17 through 20 successfully. I can also uplink between ports 1-16 on the problematic switch to ports 17 through 20 on the switch that isn't giving me trouble (and that is linked to the ProCurv...

Member Since	‎09-20-2013 07:07 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	8

User Statistics

User Activity

Issues getting IP's from a SG300-20

Issues connecting to an uplinked SG300-20

Re: Issues getting IP's from a SG300-20

Re: Issues getting IP's from a SG300-20

Re: Issues getting IP's from a SG300-20

Re: Issues getting IP's from a SG300-20

Re: Issues getting IP's from a SG300-20